Hitech TX3 10gl kit.

$650.99

14 in stock

Category:

Description

Hitech TX3 10gl kit.

Spall TX3 is a rapid set, high strength low viscosity polyurethane repair material. This two component, 1:1 system is designed to repair damaged joints, cracks, spalls and other concrete surface defects. Spall TX3 has additional working time when compared to TX, which makes it well suited as a pre polish filler. Spall TX3 can be hand mixed and troweled across concrete floors suffering from pinholes, pop outs and other defects. It can also be mixed with sand and cement to create a repair mortar material. Spall TX3 is low viscosity, 100% solids and VOC free.

Applications
TX3 has an extended pot life for larger repairs
requiring more working time.
• Fill pin holes and small surface defects
before polishing
• Rebuilding control joints
• Shallow spalls on bridge decks
• Traffic area spalls & crack repairs
• Structural Crack Injection
• Floor repair
• Stops additional damage
• Fill & repair spall before coating
• Used to “knit” cracked slabs
• Fill voids under concrete or tile

Additional information

Weight 100 lbs
Dimensions 15 × 15 × 15 in

You may also like…